Nortel Meridian 1 Administration And Maintenance page 400

Page 386 of 492
553-3011-311 Standard 7.0
Chapter 8 — Service changes and maintenance
8H DSL 0 transceiver failure
9H DSL 1 transceiver failure
AH DSL 2 transceiver failure
BH DSL 3 transceiver failure
CH DSL 4 transceiver failure
DH DSL 5 transceiver failure
EH DSL 6 transceiver failure
FH DSL 7 transceiver failure
BRI201
DSL reports layer 1 status. For SILCs in network terminator (NT) mode, the
possible status conditions can be:
0H S/T transceiver failure
1H Physical (layer 1) is activated successfully
2H Physical (layer 1) is de-activated successfully
3H Physical (layer 1) is losing synchronization
4H Physical (layer 1) is in the process of being established
5H Physical (layer 1) failed to get established
For SILCs in terminal equipment (TE) mode, the possible status conditions
can be:
0H S/T interface transceiver failure
1H Physical (layer 1) is activated successfully
2H Deactivation was requested from far end
3H Physical (layer 1) is losing synchronization
4H Physical (layer 1) is in the process of being activated
5H Physical (layer 1) failed to get established
May 1999