Nortel Meridian 1 Administration And Maintenance page 304

Page 290 of 492
Prompt
CNTY (cnt'd.)
...
CDR
CLID
PROG
...
CPFXS
553-3011-311 Standard 7.0
Chapter 6 — ISDN BRI trunk implementation
Response Comment
Enter the country pertaining to the Asia Pacific
interface.
AUST Australian interface.
CHNA China interface.
HKNG Hong Kong interface.
INDO Indonesia interface.
JAPN Japan interface.
MSIA Malaysia interface.
SING Singapore interface.
TCNZ New Zealand interface
THAI Thailand interface.
(NO), YES YES = CDR on route
(NO) = No CDR on trunk route
If answer supervision is defined for the trunk, CDR
records will only be generated on call completion.
OPT4 OPT4 is the CLID option for the Asia Pacific interface.
Progress signal.
NCHG No Change. This is the default for all Asia Pacific
interfaces except Japan and Australia.
MALE Alert message. This is the default for the Japan
interface.
MCON
Connect message. This is the default for the Australia
interface.
Customer-defined Prefixes option.
NO If CPFXS = NO, when constructing the Calling or
Connected Line Identification, the prefixes are retrieved
from the Route Data Block via the HNTN and HLCL
prompts which follow.
Enter NO for APAC.
(YES)
If CPFXS = YES, when constructing the Calling or
Connected Line Identification, the prefixes are retrieved
from the Customer Data Block via the HNTN and HLCL
prompts in LD 15, as is currently done. This is the
default response.
May 1999