Nortel Meridian 1 Administration And Maintenance page 302

Page 288 of 492
LD 16 — Configuring ISDN BRI trunk route data block parameters
Prompt
REQ
TYPE
CUST
DMOD
ROUT
TKTP
RCLS
DTRK
BRIP
DGTP
NASA
MBGA
553-3011-311 Standard 7.0
Chapter 6 — ISDN BRI trunk implementation
Configuring ISDN BRI trunk route data block parameters
Route data block parameters for the ISDN BRI Trunk access capability are
configured using LD 16.
Response Comment
NEW Add ISDN BRI protocol group settings
RDB Route data block.
0-31 Customer number.
<cr> Default model number for this route
0-511 Route number.
TIE/COT/DID Trunk route type.
<cr> Class marked route
YES Digital Trunk Route
NO BRI packet handler route
BRI Digital trunk type.
Note: BRI cannot be entered for DGTP if an ISDN BRI
Route Packet Handler has been configured on the
route.
YES/(NO) (International only) Network Attendant Service
Interface.
YES/(NO) Multi Business Group interface on the D Channel.
May 1999