Nortel Meridian 1 Administration And Maintenance page 336

Page 322 of 492
Table 20
Maintenance commands
Command
DIS CC x
DISC BRIL c
DISC BRIT c
DISC BRIT c REM
DISC c
DISI c
DISU c dsl#
DISS s
DSCK loop
DSRB c dsl#
DSTS c dsl#
DSYL loop
ENL CC x
ENCK loop
ENLC BRIT c
ENLC BRIT c FDL
553-3011-311 Standard 7.0
Chapter 8 — Service changes and maintenance
Description
Disable system clock controller (0 or 1)
Disables the ISDN BRI line application on MISP
c
Disables the ISDN BRI trunk application on the
MISP located in card slot c
Disables and removes the application loadware
for the ISDN BRI trunk application on the MISP
located in card slot c
Disables the card in slot c
Disables the card in slot c when idle
Disables the DSL in card slot c dsl#
Disable shelf s (0 for main cabinet, 1 for
expansion cabinet)
Disables the clock for loop
Remove the ISDN BRI trunk on card c dsl# from
remote loop back mode
Remove the ISDN BRI trunk on card c dsl# from
test mode
Disables yellow alarm processing for loop
Enable system clock controller x
Enable clock for loop
Enables the ISDN BRI trunk application on the
MISP located in card slot c
Enables and force downloads the application
loadware for the ISDN BRI trunk application on
the MISP located in card slot c
May 1999
Program
LD 60
LD 32
LD 32
LD 32
LD 32
LD 32
LD 32
LD 32
LD 60
LD 32
LD 32
LD 60
LD 60
LD 60
LD 32
LD 32