Nortel Meridian 1 Administration And Maintenance page 422

Page 408 of 492
553-3011-311 Standard 7.0
Chapter 8 — Service changes and maintenance
SCH5388
Remove all DSLs on the line card to change the card type.
SCH5389
DSL number is out of range. Enter a number from 0 to 7.
SCH5390
DSL data block has not been created. Configure the DSL.
SCH5391
DSL data block has already been created.
SCH5392
B-channel packet data option not enabled. B-channel packet data option must
be configured in MISP.
SCH5393
Warning: Make sure the call type matches the changed DN and TSP.
SCH5394
Specify at least one type of call, which can be VCE, DTA, or PMD.
SCH5395
System contains additional LTEIs.
SCH5396
Remove all TSPs from the DSL before removing the DSL.
SCH5397
Enter three values LTG and LTN for Logical Terminal Id and one for TEI.
SCH5398
LTIDs exceed the specified system limit.
SCH5399
LTEIs exceed maximum limit allowed for this DSL.
SCH5400
LTEI has not been configured.
SCH5401
Warning: Make sure MCAL value does not exceed the maximum number of
calls for a DSL specified in TSP.
SCH5402
System contains additional configured TSPs.
May 1999