Installing and Replacing Infrared Burners
1. Disconnect or shut off the liquid propane or natural gas line connect to the grill, wait until the burners cool
down.
2. Open the hood, remove the grate and flame tamer on top of the brass burner you want to replace (Figure 7).
3. Through the access door underneath the grill, find the round stud and locking pin that locks the burner you
want to replace (Figure 8 and Figure 9).
4. Carefully remove the locking pin with your fingers.
2006 Barbecue Owner's Manual
LTR20061004, Rev. A
Assembly and Installation
Figure 7
Figure 6
Figure 9
Assembly and Installation
Figure 8
Page 11