Lighting The Grill - Cal Flame BBQ870 Owner's Manual

Lighting the Grill

Electronically Lighting the Grill and Infrared Burners
1. Open the hood.
2. Keep your face as far away from the burners as possible.
3. Rapidly rotate the burner knob counter clockwise past the light position to HIGH. You will hear a loud
click as the electronic lighter produces a spark.
4. Listen for the sound of the gas igniting. If the burner does not light on the first try, repeat immediately.
5. If the burner does not light after three attempts, turn the control knobs to the OFF position. Wait five
minutes until the gas clears before attempting to light it again.
6. Repeat the procedure or try the manual lighting procedure below.
7. Upon successful lighting, repeat the process on the other burners you wish to light.
8. To shut off the burners, rotate the knob and turn to OFF. It is normal to hear a popping sound when the
burners are turned off.
Manually Lighting the Grill and Infrared Burners
WARNING: Do not use standard matches or cigarette lighters to perform match lighting procedures. Serious
burns can occur and lighters can explode.
1. Open the hood.
2. If you have just attempted to light the burner, allow five minutes for any accumulated gas to dissipate.
3. Slide out the drip tray from the grill.
2006 Barbecue Owner's Manual
LTR20061004, Rev. A
Figure 44. Three positions of burner knobs
Operating Your Barbecue
Page 31