Cal Flame BBQ870 Owner's Manual page 19

NOTE: Allow the speed set to dry before proceeding with the next step.
7. Using a small brush or hopper gun, apply stucco to the seam line (Figure 18 and 17).
8. Mix grout with water in a container.
9. Fill the tile seam line with grout using a small spatula or your finger (Figure 20).
10. Clean the grout with a damp rag (Figure 19).
11. Let the grout and stucco dry for at least three hours.
2006 Barbecue Owner's Manual
LTR20061004, Rev. A
Figure 16
Figure 18
Figure 20
Assembly and Installation
Figure 17
Figure 19
Figure 21
Page 15