Installation / Assembly - Cal Flame G3 Owner's Manual

Installation / Assembly

4
Most cities and counties require permits for exterior construction and
electrical circuits. In addition, some communities have codes requiring
residential barriers such as fencing and/or self-closing gates on
property to prevent unsupervised access to the property by children
under the age of five. Your dealer can provide information on which
permits may be required and how to obtain them prior to the delivery
of your equipment.
We recommend the installation, adjustment and service of your new
grill be performed by LMS qualified installers and service technicians to
ensure proper operation and prevent accidents.
When planning your Cal Flame grill location, access to a gas line
should be considered. The location with the shortest gas line run is
recommended.
When determining a suitable location, consider factors such as exposure
to wind, proximity to traffic paths, and windows that open into the
home.
Locate the barbecue grill only in a well-ventilated area and only on a
solid, flat foundation (e.g. deck or cement slab).
If you do not have an updated filler valve on your existing propane tank,
you will need to purchase one at your local hardware store. Without it
you will not be able to attach your tank to your Cal Flame grill or refill
the tank at your local propane refill station.
Converting Gas Grills
IMPORTANT: Cal Flame G3, G4, and G5 grills are manufactured to
operate on liquid propane (LP). However, they can be converted to
operate on natural gas (NG) by an authorized service technician.
Consult your Cal Flame dealer for information on converting your
gas grill.
Owners must not convert their grills themselves. Attempting
to convert the grill from LP to NG may result in serious injury
and will void the warranty coverage.
www.calspas.com
2009 G3, G4, G5 Grills
LTR20091050, Rev. A