Cal Flame BBQ870 Owner's Manual page 29

Awning Open/ Close Switch
The two-position (male) connector has two metal prongs at the end of it. These prongs fit into the female
receptacle of the other connector. Match up the two-position wire (female) with the two-position wire (male)
and securely attach them together (Figure 26 - Insert). This step must be repeated for each main support post.
Third TV Installation
1. Drill four holes on the frame to secure the screen to the metal frame.
2. Attach screen to top metal frame using nuts and bolts.
3. Center and attach the TV box to the screen, with the TV facing the barbecue grill (Figure 30).
4. Connect all wires from the TV box into a waterproof box and to the black cable (Figure 31).
5. Close box with waterproof film (Figure 30).
6. Drill a 1" hole next to the left side to insert the black flex to the other side of the frame.
7. Insert the connection cables one by one and then extend the black flex through the hole (Figure 31).
2006 Barbecue Owner's Manual
LTR20061004, Rev. A
Figure 30
Figure 32
Assembly and Installation
Figure 31
Figure 33
Page 25