Assembly And Installation; Infrared Burners - Cal Flame 2005 Spa Owner's Manual

Assembly and Installation

Infrared Burners

1. Disconnect or shut off the liquid propane or natural gas line connect to the grill, wait until the burners cool
down.
2. Open the hood, remove the grate and flame tamer on top of the brass burner you want to replace (Figure 6).
3. Through the access door underneath the grill, find the round stud and locking pin that locks the burner you
want to replace (Figure 7 and Figure 8).
Page 10
Assembly and Installation
Figure 6
Figure 5
Figure 8
Figure 7
2005 Spa Owner's Manual
7/21/2005