End Backtack - VETRON 5390 Instruction Manual

05. PROGRAMMING
04. PROGRAM PARAMETER
-13-14
» SEWING PARAMETER
100 thread clamp
110 stitch in stitch
120 backtack or condensed
stitches at seam start
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
NR. PARAMETER
»

END BACKTACK

Backtack or condensed stitches
at seam end
140
C Stitch count
141
D Stitch count
142
143 CD repetition
C Stitch length
144
07/2018
48
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
010 stitch length 1
020 foot stroke 1
030 thread tension A 1
032 thread tension B 1
041 speed
050 foot pressure
070 foot lift height
135 bobbin thread counter
060 edge value
066 Edge guide hight
DESCRIPTION
You can choose between:
OFF
STCONDS
BACKTACK
Can be set between 0 to 100 stitches.
C
Can be set between 0 to 100 stitches.
Can be set between 0 to 100 stitches.
Repeats the complete backtack depending on setup.
You can choose between:
STD
4.0 mm
C
-4.0 mm
074 foot position on stop
077 needle position on stop
021 foot stroke 2
027 automatic stroke switch
according to sewing speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
031 thread tension A 2
033 thread tension B 2
034 thread tension based
on material thickness
038 2 nd tension level when
switched to 2
054 dynamic foot pressure
= No tack on end of seam.
= Condendsed stitches at end of seam. The distance D will be used
for the backtack. The stitch length will be set in parameter 145
(Distance C will be suppressed).
= End backtack with distances C and D.
= Stitch length for B in backtack same as length set in parameter 010
(Main stitch length).
= Stitch length for B in backtack can be choosen irrespective of the
main stitch length (parameter 010) (e.g. 4,0mm).
= When the stitch length for B in backtack is entered in the
minus range this part of the backtack will done in reverse.
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
stroke 145 D stitch length
nd
146 C/D speed