VETRON 5390 Instruction Manual page 26

03. OPERATION OF THE MACHINE
04. EXCHANGING THE BOBBIN AND ADJUSTING THE BOBBIN THREAD TENSION
2
3
1
CAUTION! RISK OF INJURY!
Push the X-button at the machine head, the red light illuminates showing the active
"BLOCKED MODE", or turn the machine o before removing the bobbin. Failure to
comply produces a risk of injury in case of an unintentional machine operation.
If the machine is equipped with the special feature "BOBBIN COVER DETECTION" it is
automatically entering the "BLOCKED MODE" after opening the bobbin cover.
01. Push the X-button at the machine head, the red light illuminates showing
the active "BLOCKED MODE", or turn the machine o .
„SPERR-MODUS" ist eingeschaltet. Oder schalten Sie die Maschine am Hauptschalter ab.
02. Swing the hook cover
03. Open the tab 2 and remove the bobbin case
04. Thread the thread as shown in picture 2.
05. Insert the bobbin case
06. The bobbin thread tension can be adjusted at screw
NOTICE!
Push the X-button or switch the machine on again and follow the instructions
displayed on the control panel.
07/2018
24
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
1
3
1 down.
3 with the bobbin.
3 with the bobbin into the hook and close the tab
2
2 .
.
4
3
4
3