VETRON 5390 Instruction Manual page 45

» SEWING PARAMETER
100 thread clamp
110 stitch in stitch
120 backtack or condensed
stitches at seam start
121 A stitch count
122 B stitch count
123 A/B repetition
124 A stitch length
125 B stitch length
126 A/B speed
NR. PARAMETER
» ALLOCATION OF HOTKEYS
080 Direct parameter access
Key function
085
(Key )
3
010 stitch length 1
020 foot stroke 1
030 thread tension A 1
032 thread tension B 1
041 speed
050 foot pressure
070 foot lift height
135 bobbin thread counter
060 edge value
066 Edge guide hight
DESCRIPTION
With this parameter you can select which functions will be shown on the display
in the top right position. The value can be changed with the JOG KEY at any time.
You can choose between:
OFF = No access
TENSION = Thread tension
LENGTH = Stitch length
SPEED = Sewing speed
STROKE = Foot stroke
PRESSURE = Foot pressure
BOBBIN = Number of stitches remaining until bobbin thread is empty
EDGE = Edge distance - ruler
ASPEED = Actual speed is shown in the display
NEEDLE P = Needle position
COUNTER = Stitch count
MULTIPLE 1 = selectable: change Program; Stitch length; Tension A
With this parameter you can select the function for the key
You can choose between:
OFF = No access
TACKSW = In between tack for this program. (By pressing the key
TACKTG = In between tack for this program. (By pressing the key
STROSW = Foot stroke for this progam. (By pressing the key you will switch
STROTG = Foot stroke for this program. (By pressing the key you will switch
05. PROGRAMMING
074 foot position on stop
077 needle position on stop
021 foot stroke 2
027 automatic stroke switch
according to sewing speed
028 automatic stroke switch
speed threshold
029 automatic stroke switch
delay
031 thread tension A 2
033 thread tension B 2
034 thread tension based
on material thickness
038 2 tension level when
nd
switched to 2
054 dynamic foot pressure
the machine will sew backwards as long as you hold it).
the machine will sew backwards. When pressing the key
again it will sew forwards again).
to the 2 stroke value. By releasing the key it will go back to the
nd
1 st stroke value).
to the 2 stroke. Pressing it again will change back to the 1
nd
stroke).
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK
04. PROGRAM PARAMETER
039 release tension on
foot lift
150 thread trimming
153 trim stitch tension
158 trim stitches
159 trim stitch length
140 backtack or condensed
stitches at seam end
141 C stitch count
142 D stitch count
143 C/D repetition
144 C stitch length
nd stroke
145 D stitch length
146 C/D speed
in this program.
3
07/2018
-8-14
st
43