3Rw5 Hmi High Feature; Monitoring; Monitoring The Measured Values Of The 3Rw51 Soft Starter With The 3Rw5 Hmi High Feature - Siemens SIRIUS 3RW51 Equipment Manual

Procedure
1. Select the menu item "PBADR".
The currently set station address is displayed. You will find more information on operating the
3RW5 HMI Standard in the Equipment Manual of the 3RW5 soft starter.
2. Hold down a navigation button until the ">" symbol appears before the currently set station
address.
The ">" symbol denotes the processing status of the station address.
3. Press a navigation button.
The first position of the station address runs through the potential digits (0 ... 1).
4. Press a navigation button when the desired digit appears.
This sets the first digit of the station address. The second position of the station address runs
through the potential digits (0 ... 9, depending on the first digit).
5. Press a navigation button when the desired digit appears.
This sets the second digit of the station address. The third position of the station address runs
through the potential digits (0 ... 9, depending on the second digit).
6. Press a navigation button when the desired digit appears.
You have set the station address and are in the "PBADR" menu item. The ">" symbol to denote
the processing state is grayed out.
8.12

3RW5 HMI High Feature

8.12.1

Monitoring

8.12.1.1 Monitoring the measured values of the 3RW51 soft starter with the 3RW5 HMI High
Feature
Requirements
• 3RW5 HMI High Feature (accessory)
Menu "Monitoring > Measured Values".
Operating principle
The measured values are provided by the respective device functions. Current measured values
are stored in the measured value memory. These values can be read out and evaluated by the
3RW5 HMI High Feature. You can specify up to 5 measured values, which are shown on
the operation display (Page 121).
SIRIUS 3RW51 Soft Starter
Equipment Manual, 09/2020, A5E37108631002A/RS-AC/003
Functions
8.12 3RW5 HMI High Feature
109