Figure 24 2.5'' Hot-Swap Hdd Assembly Installation; Figure 25 2.5'' Hot-Swap Hdd Assembly Removal - Chenbro RM245 Series User Manual

RM245 Series

Figure 24 2.5'' hot-swap HDD assembly installation

1. With the lever open, insert the HDD assembly into the drive bay until the end of the HDD cage.
2. Push down the lever when it is secured into place.

Figure 25 2.5'' hot-swap HDD assembly removal

1. Press the tray button, and release the lever as shown.
2. Pull the HDD assembly out of the drive bay.
24
System Components Removal and Installation
│