Table of Contents
Advertisement
RM245 Series
2-1 Top Cover Installation
Figure 12 Front top cover installation
1. Align the guide pins of this cover with the grooves on the chassis base, and slide it toward the front panel until locked into place.
2. Secure this cover with two screws as shown.
Figure 13 Rear top cover installation
1. Align the guide pins of the cover with the grooves on the chassis base, and slide it toward the front panel until locked into place.
2. Secure this cover with two screws as shown.
18
System Components Removal and Installation
│
Hide quick links:
Advertisement
Table of Contents
