Figure 47 Redundant Psu Cage Assembly; Figure 48 Redundant Psu Cage Installation - Chenbro RM245 Series User Manual

RM245 Series

Figure 47 Redundant PSU cage assembly

1. Attach the PSU side bracket to the PSU cage, and secure it by two screws from the inside of the cage as shown.
2. Attach the PSU bracket to PSU cage, and secure it by two screws.
3. Install the PSU Cage into the chassis, and ensure the alignment of screw holes and brackets matched.
installation
Figure 48 Redundant PSU cage
4. Secure the PSU cage to the chassis base and the back panel with four screws.
5. Secure the PSU front bracket with two screws from the bottom of the chassis.
37
System Components Removal and Installation
│