Figure 59 Backplane Rear View; Table 13 Connector And Pin Header Function Description - Chenbro RM245 Series User Manual

Label Description
A Power
B Mini-SAS HD
C I2C
D Fan
E DIP Switch

Figure 59 Backplane rear view

Table 13 Connector and pin header function description

Description
The backplane includes two 2 x 4 connectors
supplying power to the backplane. Power is routed
to the backplane via a power cable harness from the
power supply.
The backplane includes three multi-port Mini-SAS
cable connectors providing data signals for twelve
SAS/SATA drives on the backplane. A cable can be
routed from matching connectors on the server
board or add-in SAS/SATA RAID cards.
The backplane includes one 4-pin cable connector
used as a management interface to the server board.
The backplane includes four fan connectors used to
control and monitor fan speed.
Follow below the DIP switch setting table.
RM245 Series
Drawing
47
Backplane
│