Table of Contents
Advertisement
RM245 Series
2-7 Fan Assembly Installation
Figure 33 RM24508 fan assembly installation
1. Insert the fan assembly into the chassis, and ensure the alignment of screw holes with the grooves on the chassis base matched on
both sides.
2. Secure the fan assembly with thumb screws on both sides as shown.
Figure 34 RM24508 fan holder installation
1. Ensure the air-flow direction pointers on the fan and the fan holder are in the same direction as shown.
2. Attach the fan holder with fan, and carefully push down until locked into place.
3. Engage the two embossed pins into the side dimples on the fan as shown.
4. Firmly push the fan until the locked into place.
29
System Components Removal and Installation
│
Hide quick links:
Advertisement
Table of Contents
