System Maintenance; Figure 31 Installation Of Whole System From The Rack; Figure 32 Removal Of Whole System From The Rack - Chenbro RM245 Series User Manual

RM245 Series

2-6 System Maintenance

Figure 31 Installation of whole system from the rack

1. Firmly hold the system on both sides, and push the system all the way into the cabinet.
2. Open and hold the latches on both sides as shown.
3. Secure the screws in the latches on both sides.

Figure 32 Removal of whole system from the rack

1. Open and hold the latches on both sides as shown.
2. Loosen the screws in the latches, and firmly grab the rack handles on both sides.
3. Pull the system out of the cabinet.
28
System Components Removal and Installation
│