Hot-Swap Hdd Assembly Maintenance; Figure 16 3.5" Hot-Swap Hdd Assembly Installation; Figure 17 3.5" Hot-Swap Hdd Assembly Removal - Chenbro RM245 Series User Manual

RM245 Series

2-3 Hot-swap HDD Assembly Maintenance

Figure 16 3.5" Hot-swap HDD assembly installation

1. With the lever open, insert the HDD assembly into the drive bay until the end of the HDD cage.
2. Push down the lever to lock it into place.

Figure 17 3.5" Hot-swap HDD assembly removal

1. Press the tray button to release the lever as shown.
2. Pull the HDD assembly out of the drive bay.
20
System Components Removal and Installation
│