2-Bay Drive Cage Installation (Back Panel); Figure 41 Drive Cage Bracket Installation (Back Panel); Figure 42 Drive Cage Installation (Back Panel) - Chenbro RM245 Series User Manual

RM245 Series

2-8 2.5" 2-bay Drive Cage Installation (Back Panel)

Figure 41 Drive cage bracket installation (back panel)

1. Attach the drive cage bracket on the bottom of the chassis, and ensure the alignment of screw holes matched.
2. Secure the bracket with two screws from the outside of the chassis.

Figure 42 Drive cage installation (back panel)

1. Insert the cage module into the chassis, and ensure the alignment of the screw holes matched.
2. Secure the cage module on the back panel with one screw as shown.
3. Secure the thumb screw on the cage to the bracket.
33
System Components Removal and Installation
│