1-8 System Packaging
The original Chenbro packaging, where the server system is delivered, is designed to provide protection for L5 configuration and
tested to meet ISTA (International Safe Transit Association) Test Procedure 1A (2008). The packaging is also designed to be reused
for shipment after the system integration has been completed.
The original packaging includes the shipping box and various protective inner packaging components, which are designed to function
together as a protective packaging system. When reused, all of the original packaging material must be used, including box and each
inner packaging component. In addition, all inner packaging components MUST be reinstalled in the proper location to ensure
adequate protection to the system for subsequent shipment.
Part Number
387-24512-3300A0
NOTE:
The design of the inner packaging components does not prevent improper placement within the packaging assembly.
There is only one correct packaging assembly that will allow the package to meet the ISTA (International Safe Transit Association)
Test Procedure 1A (2008).
Failure to follow the specified packaging assembly instructions may result in damage to the system during shipment.
Product
Unpackaged Net Weight
RM24508
RM24512
NOTE:
An L5 system does not include motherboards, processors, memories, drives, or add-in cards. It is the system
configuration as shipped from Chenbro. Weights of integrated system (system configurations that include the items
above) will vary depending on the final system configuration.
Table 5
Single/Bulk
Single
Table 6
Packaged Gross Weight
(kg)
9.5
9.5
System packaging information
Form Factor (mm)
730 x 590 x 190
Product weight information
Unpackaged Net Weight
(kg)
12.0
12.0
Support level
Packaged Gross Weight
(lb)
16.50
16.50
Product Overview
RM245 Series
L5
(lb)
26.40
26.40
16
│