2-2 HDD Cage Installation
1. Align the guide pins of the HDD cage with the grooves on the chassis base, and push this cage backward the front panel until
locked into place.
2. Secure this cage with two screws as shown.
1. Align the guide pins of the HDD cage with the grooves on the chassis base, and push this cage backward the front panel until
locked into place.
2. Secure HDD cage with two screws as shown.
NOTE:
All cage SKUs follow the same removal and installation guidelines.
Figure 14 RM24508 HDD cage installation
Figure 15 RM24512 HDD cage installation
System Components Removal and Installation
RM245 Series
19
│