Table of Contents
Advertisement
SR105 Plus Series
2-4
HDD Cage Installation
Figure 17 3.5" internal HDD cage installation
1. Insert the fan into the reserved slot.
2. Insert the HDD cage into the chassis.
3. Secure the thumb screws on the four sides of the HDD cage.
4. Plug the fan power connector in the system board.
Figure 18 3.5" hot-swap HDD cage installation
1. Insert the HDD cage into the chassis.
2. Secure the thumb screws on the four sides of the HDD cage.
19
│
Advertisement
Table of Contents
