Figure 19 3.5" Hot-Swap Hdd Cage Fan Maintenance Step-1; Figure 20 3.5" Hot-Swap Hdd Cage Fan Maintenance Step-2 - Chenbro SR105 Plus Series User Manual

1. Unplug the power connector from the backplane.
2. Release the fan module latch and pull the fan module out of the fan cage.
3. Remove the tool-less fan holder as shown and replace the fan.
4. Insert the fan module into the fan cage.
5. Make sure the power connector go through the hole on the other side of the fan cage.
6. Plug the power connector in the backplane.

Figure 19 3.5" hot-swap HDD cage fan maintenance step-1

Figure 20 3.5" hot-swap HDD cage fan maintenance step-2

SR105 Plus Series
20
│