Simatic Pdm Version; Electronic Device Description (Edd) - Siemens SITRANS LUT400 Series Operating Instructions Manual

For more information on SIMATIC PDM functions, and details on how to configure the device
using PDM, refer to the LUT400 Communications manual

SIMATIC PDM version

Check the support page of our website to make sure you have the latest version of SIMATIC
PDM, the most recent Service Pack (SP) and the most recent hot fix (HF). Go to:
http://support.automation.siemens.com/WW/
llisapi.dll?func=cslib.csinfo&lang=en&objiD=10806857&subtype=133100

Electronic Device Description (EDD)

You can locate the EDD in Device Catalog, under Sensors/Level/Echo/Siemens AG/
SITRANS LUT400. (The EDD is written for forward compatibility.)
As a guideline to locate the correct EDD, the major and minor numbers should match
between the EDD revision and the Firmware revision in the device (e.g. major and minor
numbers in bold text: 1.00.00-04).
To check it in PDM, go to SITRANS LUT400 HART > Identification > Device.
Installing a new version of SIMATIC PDM requires the most recent Service Pack (SP) and
the most recent hot fix (HF).
To install a new EDD
• Go to www.siemens.com/sitransLUT400 > Support > Software Downloads to
download the most up-to-date EDD from the product page of our website.
• Save the files to your computer and extract the zipped file to an easily accessed
location.
• Launch SIMATIC PDM – Manage Device Catalog, browse to and select the folder
which contains the unzipped EDD file.
1.
Communications for SITRANS LUT400 (HART) Manual (7ML19985NE01).
Page 128 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
1
.
A5E33329501
matching
Firmware
and EDD
revisions