Siemens SITRANS LUT400 Series Operating Instructions Manual page 478

2.8.4.4.
Determines which relay (if any) will be activated when the In-bounds Level
Alarm activates.
Options
2.8.4.5.
Read only. Used to view the current state of the In-bounds Level Alarm.
Options
2.8.5. Out-of-bounds Level Alarm
Reported when material level is outside a user-defined range (see 2.8.5.2.High
Level Value
2.8.5.1.
Enables/disables Out-of-bounds Level Alarm.
Options
2.8.5.2.
Sets the upper level value for range outside of which the Out-of-bounds
Level Alarm will activate.
Values
2.8.5.3.
Sets the lower level value for range outside of which the Out-of-bounds
Level Alarm will activate.
Values
2.8.5.4.
Determines which relay (if any) will be activated when the Out-of-bounds
Level Alarm activates.
Options
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Assigned Relay
Alarm State
2.8.5.3.Low Level Value
or
Enable
High Level Value
Range: 0.000 to 99999.000
Default: 0.000
Low Level Value
Range: 0.000 to 99999.000
Default: 0.000
Assigned Relay
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
ACTIVE
INACTIVE
).
ENALBED
* DISABLED
*
NO RELAY
RELAY 1
RELAY 2
RELAY 3
Page 165