Siemens SITRANS LUT400 Series Operating Instructions Manual page 359

Maximum Volume
The maximum volume of the vessel. Enter the vessel volume corresponding to the
High Calibration Point. For example, if your maximum vessel volume is 8000 L, enter a
value of 8000.
Value
End of QS Volume Wizard
For QS to be successful, all changes must be applied.
Options
To transfer Quick Start values to the device and return to Program menu, press
DOWN arrow
Measurement mode.
Page 46 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Range: 0.0 to 9999999
Default: 100.0
BACK, CANCEL, FINISH (Display returns to 1. 1 Quick Start menu when Quick
Start is successfully completed or cancelled. If CANCEL is selected, no
changes are written to the device.)
(Finish). Then press LEFT arrow three times to return to
7ML1998MV01