Siemens SITRANS LUT400 Series Operating Instructions Manual page 470

2.7.2.2.8.
2.7.2.2.9.
2.7.2.2.10. Peak 4 End Time
2.7.2.2.11. Peak 5 Start Time
2.7.2.2.12. Peak 5 End Time
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Peak 3 End Time
Sets the end time of the high energy cost period 3.
Values
Used in conjunction with
high cost period.
Peak 4 Start Time
Sets the start time of the high energy cost period 4.
Values
Used in conjunction with
cost period.
Sets the end time of the high energy cost period 4.
Values
Used in conjunction with
high cost period.
Sets the start time of the high energy cost period 5.
Values
Used in conjunction with
cost period.
Sets the end time of the high energy cost period 5.
Values
Used in conjunction with
high cost period.
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.7.Peak 3 Start Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.10.Peak 4 End Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.9.Peak 4 Start Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.12.Peak 5 End Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2. 1 1.Peak 5 Start Time
to define the
to define the high
to define the
to define the high
to define the
Page 157