Siemens SITRANS LUT400 Series Operating Instructions Manual page 356

1.1.2. QS Volume
Use this wizard to configure volume applications employing standard vessel shapes.
a. Press RIGHT arrow
MENU.
b. Press RIGHT arrow
c. Press DOWN arrow
d. At each step, press DOWN arrow
default values and move directly to the next item,
or RIGHT arrow
current selection is highlighted.
e. Scroll to desired item and press RIGHT arrow
to store the change, then press DOWN arrow
to continue.
f. At any time, you can press UP arrow
back, or LEFT arrow
Start of QS
Volume Wizard
Select
vessel shape
- Vessel Shape
Set
vessel volume
- Volume Units
- Maximum Volume
A5E33329501 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
to activate PROGRAM mode and open menu level 1: MAIN
two times to navigate to menu item 1.1. 1 .
and RIGHT arrow
to accept
to open Edit mode: the
to go
to cancel the wizard.
Select
transducer
- Transducer
Set
level units and
setpoints
- Units
- High Calibration Point
- Low Calibration Point
- Response Rate
Volume Wizard
complete
to open QS Volume.
QUICK START VOLUME
TRANSDUCER
XRS-5
BACK
CANCEL
NEXT
QUICK START VOLUME
TRANSDUCER
NO TRANSDUCER
XRS-5
XPS-10
XPS-15
XCT-8
XCT-12
Select
temperature source
- Temperature source
- Fixed Temperature
Set
vessel
dimensions
(vary by vessel)
- Dimension A
- Dimension L
EDIT
Page 43