Siemens SITRANS LUT400 Series Operating Instructions Manual page 469

2.7.2.2.4.
2.7.2.2.5.
2.7.2.2.6.
2.7.2.2.7.
Page 156 SITRANS LUT400 (HART) – OPERATING INSTRUCTIONS
Peak 1 End Time
Sets the end time of the high energy cost period 1.
Values
Used in conjunction with
high cost period.
For instructions on how to edit parameters with a string editor, see
Using the string editor:
Peak 2 Start Time
Sets the start time of the high energy cost period 2.
Values
Used in conjunction with
cost period.
Peak 2 End Time
Sets the end time of the high energy cost period 2.
Values
Used in conjunction with
high cost period.
Peak 3 Start Time
Sets the start time of the high energy cost period 3.
Values
Used in conjunction with
cost period.
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.3.Peak 1 Start Time
on page 188.
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.6.Peak 2 End Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.5.Peak 2 Start Time
Range: 00:00 to 23:59
Format: HH:MM (24 hour format, e.g. for
5:30pm, set parameter to 17:30)
Default: 00:00
2.7.2.2.8.Peak 3 End Time
to define the
to define the high
to define the
to define the high
A5E33329501