Motorola M68060 User Manual page 74

FITC—1/2-Cache Mode (Instruction ATC)
0 = The instruction ATC operates with 64 entries.
1 = The instruction ATC operates with 32 entries.
DCO—Default Cache Mode (Data Cache)
00 = Writethrough, cachable
01 = Copyback, cachable
10 = Cache-inhibited, precise exception model
11 = Cache-inhibited, imprecise exception model
DUO—Default UPA bits (Data Cache)
These bits are two user-defined bits for operand accesses (see 4.2.2.3 Descriptor Field
Definitions ).
DWO—Default Write Protect (Data Cache)
0 = Reads and writes are allowed.
1 = Reads are allowed, writes cause a protection exception.
DCI—Default Cache Mode (Instruction Cache)
00 = Writethrough, cachable
01 = Copyback, cachable
10 = Cache-inhibited, precise exception model
11 = Cache-inhibited, imprecise exception model
DUI—Default UPA Bits (Instruction Cache)
These bits are two user-defined bits for instruction prefetch bus cycles (see 4.2.2.3
Descriptor Field Definitions )
Bit 0—Reserved by Motorola. Always read as zero.
MOTOROLA M68060 USER'S MANUAL
Memory Management Unit
4-5