KidKraft Cedar Summit Kingsbridge Installation And Operating Instructions Manual page 96

Step 41: Roof Assembly
Part 3
E: On the inside of each Roof Assembly on the bottom siding of the (2752) MOD Roof Fronts (6th siding down
from top of Roof Assembly), measure 1" (25mm) from each side of (2761) Roof Sleeper C and pre-drill 2 holes
with a 3/16" (4.8mm) drill bit as shown in fig. 41.5 and 41.6. This will now be referred to as the front of each Roof
Assembly.
F: On the outside of each Roof Assembly place 1 (8069) Dormer Cleat over the pre-drilled holes and from inside
the assembly attach with 2 (S20) Wood Screws per Roof Assembly. (fig. 41.5, 41.7 and 41.8)
Fig. 41.5
Inside View
2752
S20
Fig. 41.7
Inside View
2752
Wood Parts
2 x Dormer Cleat
8069
2761
Hardware
4 x
S20
6th
Siding
2752
8069
Wood Screw
96
Fig. 41.6
Inside View
1"
25mm
Pre-drilled
hole
2761
Fig. 41.8
Outside View
Front
1"
25mm
2752