KidKraft Cedar Summit Kingsbridge Installation And Operating Instructions Manual page 110

Step 48: Attach Slides to Fort
Part 1
A: Place 1 Slide in the centre of each opening of the Side Wall on Unit B, pre-drill with a 1/8" (3.2mm) drill bit
then attach each slide to fort through the (2772) Panel Floor Support using 3 (S7) Pan Screws per slide. (fig.
48.1, 48.2 and 48.3)
B: Place 1 Slide in the centre of each opening of the Side Wall on Unit B, pre-drill with a 1/8" (3.2mm) drill bit
Fig. 48.1
Fig. 48.2
S7
2772
Side Wall
Slide
2772
Hardware
6 x Pan Screw
S7
110
Unit B
Slide
S7
Fig. 48.3
Slide
Other Parts
2 x Slide