KidKraft Cedar Summit Kingsbridge Installation And Operating Instructions Manual page 64

Step 23: Attach Wall Tops
A: From inside the assembly place 1 (2804) Wall Top tight to the posts and top of (2665) Half Wall Insert on
Front Wall of Unit B and tight to the posts and top of (2756) Siding Assembly on Swing Wall of Unit B then attach
to the posts with 2 (S11) Wood Screws per (2804) Wall Top. (Fig. 23.1, 23.2 and 23.3)
B: Attach (2804) Wall Tops to (2756) Siding Assembly and (2665) Half Wall Insert with 2 Corner Brackets per
panel using 3 (S13) Pan Screws per bracket. Corner Brackets are attached to the inside slats of the panels. (fig.
23.4)
Fig. 23.1
Unit B
Fig. 23.3
Front Wall
2665
S11
Wood Parts
2 x Wall Top
2804
Front Wall
Swing Wall
2804
Swing Wall
Unit A
2804
2756
Hardware
4 x Wood Screw
S11
12 x Pan Screw
S13
64
Fig. 23.2
Inside View
S11 x 2 per
board
Fig. 23.4
S13
Inside View
Corner Bracket
Other Parts
2 x Corner Bracket Set (pkg of 2)
Tight
2804
/
2665 2756
2804
Slat