KidKraft Cedar Summit Kingsbridge Installation And Operating Instructions Manual page 67

Step 24: Attach Door Components
Part 3
E: On the outside bottom edge of (2709) Door Window Panel measure 1" up from the hinge and install 1 Door
Bumper using 1 (S0) #8 x 7/8" Truss Screw. There should be a measurement of 5/8" from the back of (2709)
Door Window Panel to the screw hole. (Fig. 24.5 & 24.6)
Fig. 24.5
Side View
Door Bumper
5/8"
1.59cm
S0
1"
2.54cm
Hardware
1 x
Fig. 24.6
#8 x 7/8" Truss Screw
S0
67
Other Parts
1 x Door Bumper