KidKraft Cedar Summit Kingsbridge Installation And Operating Instructions Manual page 69

Step 26: Attach Door Stop
A: In the notched out opening of (2715) Door Stop attach the Magnetic Catch using 2 (S18) Wood Screws. (fig.
26.1) Important: Use a hand held screw driver and DO NOT over tighten.
B: On the inside of the assembly, attach (2715) Door Stop to (2770) End Post Left with 3 (S11) Wood Screws,
making sure (2715) Door Stop has an overhang of 1-1/4"(32mm) and is in position to receive the Catch Plate.
(fig. 26.2 and 26.3)
Fig. 26.2
Inside View
Wood Parts
1 x Door Stop
2715
2770
S11
2715
Hardware
2 x Wood Screw
S18
3 x Wood Screw
S11
69
Fig. 26.1
S18
2770
1-1/4" (32mm)
1 x Magnetic Catch
2715
Magnetic Catch
Fig. 26.3
2715
Other Parts