KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 30

Step 15: Attach Wall Boards
A: On both sides of (A30) Tarp Support attach 2 (A9) Cedar Walls to (A29) Side Top and (A14) SW Floor with 4
(S1) #8 x 1-1/8" Wood Screws per board. Make sure the bottom of the boards are tight against the gap boards and
the bevelled edges to the top, facing out. Space between boards should be 3-1/8", but not to exceed 3-1/4". (fig.
15.1 & 15.2)
B: On both sides of (A31) SW Mount attach 2 (A9) Cedar Walls to (A29) Side Top and (A14) SW Floor with 4 (S1)
Step 11 Wall Boards
#8 x 1-1/8" Wood Screws per board. Make sure the bottom of the boards are tight against the gap boards and the
bevelled edges to the top, facing out. Space between boards should be 3-1/8", but not to exceed 3-1/4". (fig. 15.1
& 15.2)
Fig. 15.1
A9
Note: Gaps between
boards 3-1/8", not to
exceed 3-1/4"
Wood Parts
4 x Cedar Wall 1 x 4 x 28"
A9
4 per board
A30
A29
A9
A14
16 x
S1
A31
Note: Gaps between boards
3-1/8", not to exceed 3-1/4"
A29
A9
A14
Hardware
S1 #8 x 1-1/8" Wood Screw
30
A9
S1
A14
Fig. 15.2