KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 34

Step 19: Attach Rope Ladder
A: Attach Rope Ladder to (A24) Top Rope and (A22) Lower Back as shown in fig. 19.1. Make sure the top and
bottom rungs have at least a 9-1/4" clearance. Tie each end of the rope as shown in fig. 19.2 & 19.3.
B: Secure the top knots with 2 Cable Ties per rope as shown in fig. 19.2. Be sure to trim the Cable Tie excess
and round off any sharp edges.
Step 17 Attach Rope Ladder
STEP 18 Attach Rope Ladder
Fig. 19.1
STEP 19 Attach Slide and Acro Swing
STEP 18 Attach Rope Ladder
9-1/4"
9-1/4"
A22
STEP 19 Attach Slide and Acro Swing
Fig. 19.2
A24
Secure with cable ties. Trim excess
cable ties and round sharp edges.
34
A24
1" between
cable ties
Cable ties
Fig. 19.3
A22
Other Parts
1 x Rope Ladder
8 x Cable Ties