Download Print this page

KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 13

Play system

Advertisement

Step 1: Inventory Parts - Read This Before Starting Assembly
This is the time for you to inventory all your hardware, wood and accessories,
A.
referencing the parts identification sheets. This will assist you with your assembly.
• The wood pieces will have the four digit key number stamped on the ends of the
boards. The wood pieces are referenced throughout the instructions with this number.
• Please refer to Page 6 for proper hardware assembly.
• Each step indicates which bolts and/or screws you will need for assembly, as well as
any flat washers, lock washers, t-nuts or lock nuts.
If there are any missing or damaged pieces or you need assistance with
B.
assembly please contact the consumer relations department directly. Call us
before going back to the store.
1.800.933.0771 or 972.385.0100
customerservice@kidkraft.com
canadacustomerservice@kidkraft.com
For online parts replacement visit
https://parts.kidkraft.com/
Read the assembly manual completely, paying special attention to EN71 and
C.
ASTM warnings; notes; and safety/maintenance information on pages 1 - 6.
Before you discard your cartons fill out the form below.
D.
• The carton I.D. stamp is located on the end of each carton.
• Please retain this information for future reference. You will need this information if you
contact the Consumer Relations Department.
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 1)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 2)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 3)
MODEL NUMBER: F24035EX
TRACKING NUMBER (from ID Plaque):
+31 20 305 8620
europecustomerservice@KidKraft.com
For online parts replacement visit
https://parts.kidkraft.eu/
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 4)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 5)
CARTON I.D. STAMP: __ __ __ __ __ 14459 ___ (Box 6)
13

Advertisement

loading

This manual is also suitable for:

F24035ex