KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 21

Step 8: Attach Side Joist and Centre Divider
A: From the inside of the assembly attach (A15) Side Joist to (A24) Tope Rope with 2 (H3) 1/4 x 2-1/2" Hex
Bolts (with lock washer, flat washer and t-nut) and 2 (S7) #12 x 2" Pan Screws (with 3/16" flat washer). Bolts and
screws are to be installed from the outside of the assembly. (fig. 8.1)
B: Attach 1 (A13) Centre Divider to (A23) Acro Top with 1 (H13) 1/4 x 3-1/2" Hex Bolts (with lock washer, flat
washer and t-nut) installed from the outside of the assembly (fig. 8.1) and to (A17) Floor Front with 1 (H13) 1/4 x
3-1/2" Hex Bolts (with lock washer, flat washer and t-nut) installed from the inside of the assembly. (fig. 8.2)
Hex Bolt Assembly
Lock
Washer
Flat Hex
Washer Bolt
Cut out
A17
Wood Parts
1 x Side Joist 2 x 2 x 34-3/4"
A15
1 x Centre Divider 2 x 3 x 38"
A13
Step 5 Attach Back Joist & Front Divide
T-Nut
Fig. 8.1
A13
Fig. 8.2
H13
2 x #12 x 2" Pan Screw (with 3/16" flat washer)
S7
2 x H3 1/4 x 2-1/2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
2 x 1/4 x 3-1/2" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H13
A13
H13
A17
Hardware
21
A23
A24
A15
S7
H3