KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 32

Step 17: Attach Canopy
A: Place Canopy over (A26) Ridge making sure bottom edges of Canopy are even on both sides of assembly.
(fig. 17.1)
B: Secure one side by attaching Canopy to 1 (A28) Top End using 5 (S5) #8 x 1/2" Pan Screws (with #8 flat
Step 13 Attach Roof
washer). (fig. 17.1)
C: Make sure the Canopy is taut and then secure to the remaining (A28) Top End using 5 (S5) #8 x 1/2" Pan
Screws (with #8 flat washer). (fig. 17.1)
D: Attach Canopy to each end of (A26) Ridge using 2 (S5) #8 x 1/2" Pan Screws (with #8 flat washer). (fig. 17.1)
Fig. 17.1
S5
x 5
S5
Canopy
x 5
S5
A26
A28
A28
Hardware
Other Parts
1 x Canopy
12 x #8 x 1/2" Pan Screw (with #8 flat washer)
S5
32