KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 28

Step 13: Attach Roof Supports
A: Attach 1 (A30) Tarp Support to (A29) Side Top and (A14) SW Floor on the Right Wall side of the assembly with
2 (H2) 1/4 x 2" Hex Bolts (with lock washer, flat washer and t-nut). The support should be flush to the bottom of
(A14) SW Floor. (fig. 13.1)
B: Attach 1 (A31) SW Mount to (A29) Side Top and (A14) SW Floor on the Left Wall side of the assembly with
2 (G4) 5/16 x 4" Hex Bolts (with lock washer, flat washer and t-nut). This board should be flush to the bottom of
(A14) SW Floor. (fig. 13.1)
Wood Parts
1 x Tarp Support 2 x 2 x 56"
A30
1 x SW Mount 2 x 4 x 56"
A31
Step 10a Attach Roof Supports
Fig. 13.1
A29
H2
Right Wall Side
H2
2 x
(1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
G4
2 x
(5/16" lock washer, 5/16" flat washer, 5/16" t-nut)
A30
A14
Hardware
1/4 x 2" Hex Bolt
5/16 x 4" Hex Bolt
28
A31
G4
A29
Left Wall Side
A14