KidKraft MEADOWVALE II Installation And Operating Instructions Manual page 26

Step 12: Floor Assembly
A: From the inside of the assembly measure 3-1/8" down from top of each (A14) SW Floor End then attach (A16)
Floor Joist to each board with 1 (S4) #8 x 3" Wood Screws per end. (fig. 12.1, 12.2 and 12.3)
B: Attach 1 (A8) Centre Board to (A17) Floor Front, (A16) Floor Joist and (A15) Side Joist with 5 (S2) #8 x 1-1/2"
Wood Screws. Make sure this board is tight to (A24) Top Rope and the gap in this board fits around (A13) Centre
Divider. (fig. 12.1)
C: Attach 1 (A3) CE Gap Board to each end of the Floor Assembly with 5 (S2) #8 x 1-1/2" Wood Screws per
board. Make sure the boards are tight to (A24) Top Rope, (A14) SW Floor and to each (A20) Corner Post. (fig.
12.1)
Step 9 Floor Asy
Fig. 12.1
A13
A17
A16
A14
S4
x 1 per
side
Wood Parts
1 x Floor Joist 5/4 x 2 x 38-1/2"
A16
1 x Centre Board 1 x 6 x 23-1/2"
A8
2 x CE Gap Board 1 x 6 x 23-1/2"
A3
Step 9 Floor Asy
Step 9 Floor Asy
A20
S2
A14
A24
A3
A8
A15
2 x
15 x
ALTERNATE VIEW ON NEXT PAGE
x 15
x 2
Hardware
S4 #8 x 3" Wood Screw
#8 x 1-1/2" Wood Screw
S2
26
A14
3-1/8"
3-1/8"
Fig. 12.2
A16
A14
3-1/8"
3-1/8"
A16
Fig. 12.3
A14