Step 9: Attach Lower Front and Rock Rails
A: Attach 1 (A18) Corner Block flush to the bottom and side of 1 (A11) Rock Rail with 2 (S4) #8 x 3" Wood
Screws as shown in fig. 9.1.
B: Attach the (A11) Rock Rail from Step 9A, 5/8" above the top of (A17) Floor Front and tight to (A20) Corner
Post with 2 (S15) #8 x 1-3/4" Wood Screws. (fig. 9.2, 9.3 & 9.4)
C: Attach a second (A11) Rock Rail 5/8" above the top of (A17) Floor Front and tight to (A13) Centre Divider with
2 (S15) #8 x 1-3/4" Wood Screws. Maintain 17" from outside of (A11) Rock Rails, top and bottom. (fig. 9.2, 9.3 &
9.4).
Step 6 Attach Lower Front & Rock Diagonal
D: Attach (A25) Lower Side to (A18) Corner Block with 2 (S2) #8 x 1-1/2" Wood Screws. (fig. 9.2 & 9.3)
E: Attach 1 (A19) Lower Front to each (A11) Rock Rail and to (A18) Corner Block on the Left Wall side with 6
(S15) #8 x 1-3/4" Wood Screws. (fig. 9.2)
Fig. 9.2
A17
S15
Left Wall Side
A18
A11
A19
S15
x 6
Notice hole
locations
Wood Parts
1 x
Corner Block 2 x 3 x 4-1/2"
A18
2 x
Rock Rail 2 x 3 x 51"
A11
1 x
Lower Front 1 x 6 x 39-3/4"
A19
Step 6 Attach Lower Front & Rock Diagonal
A20
A25
A18
S2
2 x
S2
2 x
10 x
S15
Step 6 Attach Lower Front & Rock Diagona
Fig. 9.1
A11
to rock
Attach block to
rock rail first
S4
Flush
A18
Hardware
#8 x 1-1/2" Wood Screw
S4
#8 x 3" Wood Screw
#8 x 1-3/4" Wood Screw
22
attach
block
to rock
rail first
5/8"
attach
block
rail first
A13
S15
17"
A11
A19
Fig. 9.4
attach
block
to rock
rail first
A11
A17
Fig. 9.3
A20
A18
S2