Typical Pressure Drop Of The Heat Sink With Water; Figure 34: Typical Pressure Drop Depending On The Volume Flow - KEB COMBIVERT F6 Series Instructions For Use Manual

WATer-cOOLeD DeVIceS

5.1.8 Typical pressure drop of the heat sink with water

•
•
•
•
1,6
1,2
0,8
0,4
0,0
0
Legend
Working area
Figure 34: Typical pressure drop depending on the volume flow
82
The curve characteristic shown below applies to a flow temperature of 25 °C and a
glycol content of 52 %.
If higher flow temperatures are used, the pressure drop in the system decreases.
This also applies to cooling media such as water or another glycol mixture
A glycol mixture from Clariant in a ratio of 52 % or 33 % is recommended.
2,5 5 7,5
q / l /min
10 15
12,5
20
17,5