Standards For Controls With / Without Safety Technology - KEB COMBIVERT F6 Instructions For Use Manual

STANDARDS FOR CONTROLS WITH / WITHOUT SAFeTy TeCHNOLOGy

Standards for controls with / without safety technology
DGUV regulation 3 Electrical installations and equipment
DIN 46228-1 Wire-end ferrules; Tube without plastic sleeve
DIN 46228-4 Wire-end ferrules; Tube with plastic sleeve
DIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection of
electrical equipment - Earthing arrangements, protective conductors and protec-
tive bonding conductors (IEC 64/1610/CD)
EN 60204-1 Safety of machinery - electrical equipment of machines Part 1: General require-
ments (VDE 0113-1, IEC 44/709/CDV)
EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1 Insulation coordination for equipment within low-voltage systems Part 1: Princi-
ples, requirements and tests (IEC 60664-1)
EN 61131-2 Programmable controllers - Part 2: Equipment requirements and tests (IEC-61131-2)
EN 61508-1...7 Functional safety of electrical/electronic/programmable electronic safety-related
systems – Part 1...7 (VDE 0803-1...7, IEC 61508-1...7)
EN 61800-2 Adjustable speed electrical power drive systems - Part 2: General requirements -
Rating specifications for low voltage adjustable frequency a.c. power drive
systems (VDE 0160-102, IEC 61800-2)
EN 61800-3 Speed-adjustable electrical drives. Part 3: EMC requirements and specific test
methods (VDE 0160-103, IEC 61800-3)
EN 61800-5-1 Adjustable speed electrical power drive systems - Part 5-1: Safety requirements
- Electrical, thermal and energy (IEC 61800-5-1); German version EN 61800-5-1
EN 61800-5-2 Adjustable speed electrical power drive systems - Part 5-2: Safety Requirements
- Functional (IEC 22G/264/CD)
EN 62061 Safety of machinery - functional safety of electrical, electronic and program-
mable electronic safety-related systems (VDE 0113-50, IEC 62061)
EN ISO 13849-1 Safety of machinery - safety-related parts of control systems - Part 1: General
principles for design (ISO 13849-1); German version EN ISO 13849-1
UL 61800-5-1 American version of the EN 61800-5-1 with „National Deviations"
11