Connection Of The Oil Cooling System; Figure 35: Connection Of The Oil Cooling System - KEB COMBIVERT F6 Series Instructions For Use Manual

OIL-cOOLeD DeVIceS

5.2.3 connection of the oil cooling system

The connection to the oil cooling system can occur as closed or open cooling circuit.
Connection to a closed cooling circuit is recommended, because the risk of oil contam-
ination is very low.
Other elements in the cooling circuit such as pumps, shut-off valves, ventilation etc.
must be attached according to the cooling system and the local conditions.
No. connection
①
Forward flow
②
Return flow
Figure 35: Connection of the oil cooling system
84
① ②
Type
G 1/2 internal thread
KEB recommends the use of a flow switch in order to monitor the flow in the
cooling system.